Technical specifications
     R2O Content: <0.8%
Filament diameter:11μm-13μm
Moisture:≤0.2%
Loss on Ignition:2%-9%
Binder Type   Powder or Emulision
Compatible Resin:    Polyester
Styrene Solubility <50seconds

Product Characteristics:
    1.Quick wet-out with resins,degassing properties,easily fills mold and conforms to complex shapes.
2.Fiber and binder evenly distributed without defects of fuzz,oil spot,and blots.
3.High mechanical strength and high wet strength retention.

*Special:products are according to customer's requirements.

Individual and bulk packaging:
Individual packaging:each roll is wound on a cardboard tube(exterior diameter 76mm)and protected by a plastic bag,then be put into a carton.
Each standard pallet with the size of 1280mm×960mm×120mm contains 12 of rolls with the packaging type of 4x3.
Static stacking of the pallets is possible up to one high.

Storage:
The EMC should be stored dry and in its original packaging.The best conditions are temperature between 10 to 35 and at a relative humidity between 35% to 55%.